Q6P1CXXW12E

FEATURES OF THE Q6P1CXXW12E LED INDICATOR:

ELECTRICAL SPECIFICATIONS
Voltage Operating Voltage Operating Current
(Min to Max) (Typical All Types)
05 (No Resistor) 3.3 to 9.9 VDC 40 mA max*
12 VDC 10.8 to 13.2 VDC 40 mA
24 VDC 21.6 to 26.4 VDC 40 mA
28 VDC 25.2 to 30.8 VDC 40 mA
110 VAC 99 to 121 VAC 5 mA
220 VAC 207 to 235 VAC 3 mA

ADDITIONAL INFORMATION ON LED COMPONENTS
• Bi-colour LEDs, by connecting the gold faston (+) one colour is produced, by reversing the supply voltage another colour is produced – bi-colours are available up to 28 VDC
• The tri-colour led has red and green LEDs when both are connected yellow is produced
• The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy
• Luminous intensity is measured at 20 mA on a discrete led unless otherwise stated.
• Luminous intensities and colour shades of white LEDs may vary within a batch.
• Luminous intensity will be reduced with lower operating current.
• Recommended usage:
– Standard: Homogenous light output that is good for indoor applications.
– Super Bright: Homogenous light output that is good for outside viewing and is daylight visible.

ENVIRONMENTAL SPECIFICATIONS
• IP67 sealing option (EN60529)
• Operating & Storage Temperature Range:
Rear plastic body: -30 °C to +65 °C ( –22 °F to +149 °F)
Rear epoxy body: -40 °C to +85 °C ( –40 °F to +185 °F)

GENERAL SPECIFICATIONS
• Max Reverse Voltage: 5 V
• Viewing Angle: 30–100° (dependant on model)
• Life Expectancy: 100,000 hours
• Torque: 75 cNm
• Maximum panel thickness:
12 mm (Prominent & Recessed),
10 mm (Flush & Chamfered)
• Insulation resistance : 4,000 MΩ at 500 VDC

MATERIALS
• Plated brass bezel finished in bright chrome, black or satin grey and moulded polycarbonate rear body.