$44.00 ex GST
| Weight | 10 g |
|---|---|
| Dimensions | 17 × 17 × 45 mm |
| Actuator Shape | Round, elastomeric membrane |
| Electrical Function | N.O. Momentary |
| Terminals | Solder Lugs |
| Contacts | Silver |
| Actuator Colour | Black |
| LED Colour | Blue |
| Marking | Dot |
Out of stock
Specification: See Datasheet
FEATURES OF THE IXP3S12BRXCD PUSH BUTTON:
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load:
– Gold plated contact (0):
100 mA 28 VDC, 1,000,000 cycles
– Silver contact (1):
2 A 28 VDC, 100,000 cycles
• Initial contact resistance : 100 mΩ max.
• Insulation resistance : 1 GΩ min. at 500 VDC
• Dielectric strength : 1,500 Vrms
• Contact bounce : 10 ms
GENERAL SPECIFICATION
• Panel thickness : 1.5 mm (.059) min. – 4 mm (.157) max.
• Total travel : 1.7 mm (.066) ± 0,3 mm
• Typical operating force : 4 N ± 3 N
• Low level or mechanical life : 1,000,000 cycles
• Torque (applied to nut) : 1 Nm max. with metal nut U166
1.5 Nm max. with plastic nut U4248
• Soldering : 300 °C (572 °F) max. for 3 seconds
ENVIRONMENTAL SPECIFICATIONS
• Panel thickness : 2 to 8 mm
• Total travel : 2 mm (.078) ± 0.3 mm
• Typical operating force : 7 N ± 2 N
• Low level/mech. life : 1,000,000 cycles
• Torque : 0.55 Nm (0.6 Nm max.) applied to nut
• Soldering : 320 °C (608 °F) max. for 3 sec.
MATERIALS
• Case : thermoplastic UL94-V0
• Actuator : silicone
• Bushing : ABS UL94 HB
• Contacts :
0 : brass, gold plated
1 : silver
• Output wires : AWG24, section 0.23 mm2 – 500 mm
• Terminal seal : epoxy
