Additional information
| Weight | 10 g |
|---|---|
| Dimensions | 13 × 13 × 26 mm |
| Series | IP |
| Actuator Shape | Square |
| Electrical Function | NO/NC combined |
| Terminals | Solder Lugs |
| Contacts | Silver, Gold Plated |
| Actuator Colour | Yellow |
| LED Colour | N/A |
$43.93 ex GST
| Weight | 10 g |
|---|---|
| Dimensions | 13 × 13 × 26 mm |
| Series | IP |
| Actuator Shape | Square |
| Electrical Function | NO/NC combined |
| Terminals | Solder Lugs |
| Contacts | Silver, Gold Plated |
| Actuator Colour | Yellow |
| LED Colour | N/A |
18 in stock
| Quantity | Discount | Discounted price |
| 1 - 5 | - | $43.93 |
| 6 - 10 | 2.5% | $42.83 |
| 11 - 20 | 5% | $41.73 |
| 21 - 50 | 7.5% | $40.64 |
| 51 - 100 | 10% | $39.54 |
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load:
4A 12VDC, 200,000 cycles
1A 48VDC, 200,000 cycles
2A 48VDC, 100,000 cycles
3A 48VDC, 75,000 cycles
1A 72VDC, 15,000 cycles
• Initial contact resistance: 100 mΩ max.
• Insulation resistance: 1 GΩ min. at 500VDC
• Dielectric strength: 1.500 Vrms between terminals – 1.000 Vrms between terminals and frame
GENERAL SPECIFICATION
• Panel thickness: 1.5 mm (.059) min. 5.5 mm (.217) max.
• Total travel: 2.5 mm (.098) +/- 0.3 mm
• Typical operating force: 10 N
• Low level/mechanical life : 200,000 cycles
• Torque : 1.5 Nm max. applied to nut
• Soldering : 320°C max. for 3 sec
ENVIRONMENTAL SPECIFICATIONS
• Front panel sealing: IP67 according to IEC 60529
• Shock resistance: 100 g according to IEC 512-4, test 6c
• Vibration resistance: 10-500Hz – 10 g according to IEC 512-4, test 6d
• Salt spray: IEC 512-6, test 11f
• Robustness (non-illuminated): IK06 according to EN 50102 (1 joule)
• Operating temperature: -40°C to +85°C (-40°F to 185°F)
MATERIALS
• Case: thermoplastic, UL 94-V0
• Actuator: polyamide 6/6
• Bushing/bezel: zinc die-cast (zamak), black painted
• Contacts: silver, gold plated
• Output wires (flying lead terminals):
F version: AWG20, section 0.6 mm2
W version: AWG24, section 0.23 mm2
• LED wires:
F version: AWG26, section 0.12 mm2
W version: AWG24, section 0.23 mm2
• Lens: polycarbonate
• Terminal seal: epoxy