Q10F5SXXG24E

FEATURES FOR THE Q10F5SXXG24E LED INDICATORS:

ELECTRICAL SPECIFICATIONS
Voltage Operating Voltage Operating Current
(Min to Max) (Typical All Types)
02 (No Resistor) 1.8 to 3.3 VDC 20 mA max*
6 VDC 5.4 to 6.6 VDC 20 mA
12 VDC 10.8 to 13.2 VDC 20 mA
24 VDC 21.6 to 26.4 VDC 20 mA
28 VDC 25.2 to 30.8 VDC 20 mA
* Customer to supply resistor for desired operating current.

ADDITIONAL INFORMATION ON LED COMPONENTS
• Bi-colour LEDs, by connecting the gold solder lug (+) one colour is produced, by reversing the supply voltage another colour is produced – Bi-colours are available up to 28 VDC. [AC products not available]
• The tri-colour led has red and green LEDs when both are connected yellow is produced
• The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy
• Luminous intensity is measured at 20 mA on a discrete led unless otherwise stated.
• Luminous intensities and colour shades of white LEDs may vary within a batch.
• Luminous intensity will be reduced with lower operating current.
• Recommended usage:
– Standard: Homogenous light output that is good for indoor applications.
– Hyper Bright: Homogenous light output that is good for outside viewing and is daylight visible.
– Super Bright: A water clear LED that is good for long distance viewing and is daylight visible.

ENVIRONMENTAL SPECIFICATIONS
• IP67 sealing option (EN60529)
• Operating & Storage Temperature Range: -40 °C to +85° C ( -40 °F to +185 °F)

GENERAL SPECIFICATIONS
• Max Reverse Voltage: 5 V
• Viewing Angle: 60° (dependant on model)
• Life Expectancy: 100,000 hours
• Torque: 20 to 25 cNm
• Maximum panel thickness 7 mm
• Insulation resistance : 4,000 MΩ at 500 VDC

MATERIALS
• Stainless Steel 316L or Anodized Aluminium with potted rear end